Solvline CS-CAN Command Manual Manual de usuario descargar pdf (Pagina 14)

Programming Guide

3.2 How to set configuration for the CAN communication

environment.

Order

Command

Description

Summary

Step 1.

MO<CR>

Send VA<CR> command to CS-CAN and check the current

mode in CS-CAN. If returned syntax is OK0<CR>, then the

mode is in Configuration mode, but if it is OK1<CR>, then it is

in Active mode. If the mode is Configuration mode in CS-

CAN, please move to Step 3, but if the mode is Active Mode,

then proceed to Step 2.

Check for current

mode used in CS-

CAN

Step 2

+++<CR>

Send +++<CR> command to CS-CAN to change the mode to

Configuration mode.

Modify

Configuration mode

Step 3

WC(BS)<CR>

Send WC command to CS-CAN and modify the serial

communication environment settings in CS-CAN.

Modify serial

communication

environment

Step 4

SV<CR>

Send SV<CR> command to CS-CAN and save the

configuration in CS-CAN.

Save settings

Step 5

SR++<CR>

Reboot CS-CAN by sending SR<CR> command to CS-CAN.

Reboot CS-CAN

1 2 ... 9 10 11 12 13 14 15

Sin comentarios

Solvline CS-CAN Command Manual Manual de usuario Pagina 14